| stainless steel Curvex [message #6277] |
Sat, 21 November 2015 16:05  |
 |
JackW
Messages: 1938
Registered: May 2013
Location: Denver
|
Gruen Authority
Head Janitor
Site Admin |
|
|
Model name : Unknown
Type : Curvex
Period/date : 1935
Gender : mens
Case Maker : unknown Swiss
Case Material : stainless stamped Staybrite
Case Serial : 21690
Case Style no : na
Caliber : 311
Movement Maker : Gruen
Movement Serial: 365725
Bracelet : na
Other info :
This is the watch that I bought from Mark (on the Vintage Watch Forums) earlier this week. He had little info on the history of the watch (i.e., previous owner, service history, etc). He got it in a lot that he purchased which had Hamilton's in it that he was after. In buying it, I apparently poached it out from under afire as he was thinking on it. Sorry...
The watch features a stainless steel case and is a Curvex. I knew stainless cased Curvexes existed; once had an exchange with Cary a loooooooooong time ago about them and that they are not particularly common as Curvexes go. The unfortunate aspect on it is the dial. It most assuredly isn't original and as vintage redials go... it ain't the best one. Back channel discussions with afire indicate that there is likely little info to be had on the design that was originally there. ...but there are certainly designs on other watches that are likely what the redial was going for. It shouldn't be too far off as long as the dial wasn't swapped at some point. Which is possible but I'll likely never know. Afire also mentioned to me that a good chunk of the stainless Curvex watches he has seen were Alpina's.
This is the only Curvex in my collection. I have had one before, but sold it. That one was a cal 440 in a GF case (on sterling)... This one in my opinion really is a "true" Curvex as it is representative of the long style that Gruen did in the 1930s with the 311's and 330s. This one lug-tip to lug-tip is 44mm long. That 440 was square and not unlike the contemporaneous veri-thin I had too.
Mark sold it to me as running... it does but the action on it is a tad slow so it'll get a COA before it goes into the wear rotation. On that note... it'll be some months. The watch I have on the bench now will be the last I do before packing up the shop to move. My wife and I bought a house.
As to the date: The movement serial fits square between two 311's in the database that both had 1935 dates engraved. Certainly Gruen was't casing things sequentially, but considering those dated watches, the short run on the 311's and the case material (absent the trademarked Guildite), I fell comfortable with being somewhat precise in the year.
For fun, here is the stainless steel triad of the Gruen's flagship wrist watches: Curvex, Quadron, and Pan American.
-
Attachment: case_data.jpg
(Size: 106.37KB, Downloaded 1167 times)
-
Attachment: curved.jpg
(Size: 101.41KB, Downloaded 1161 times)
-
Attachment: dial.jpg
(Size: 123.18KB, Downloaded 1148 times)
-
Attachment: front.jpg
(Size: 92.62KB, Downloaded 1154 times)
-
Attachment: movement.jpg
(Size: 122.29KB, Downloaded 1101 times)
-
Attachment: the_triad.jpg
(Size: 108.35KB, Downloaded 1149 times)
All I know is based on hard work & writing by others. I can only aspire to augment this body of knowledge. If I am wrong it is because of my own failings. -me
"If I have seen farther it is by standing on the shoulders of giants." - Newton
[Updated on: Sat, 21 November 2015 16:07] Report message to a moderator |
|
|
|
|
|
|
|
|
|
| Re: stainless steel Curvex [message #6284 is a reply to message #6282] |
Mon, 23 November 2015 17:33  |
 |
afire
Messages: 1331
Registered: May 2013
Location: Wisconsin
|
Gruen Authority |
|
|
Jack, if you get the dial redone, I'd go with Kirk Rich in California. Since it's not in the Master Book, we probably can't know exactly what the original print was, but there are a few other Import Curvex models from around that 1935 range in the book. They seem to have art deco-ish designs, and Kirk Rich does a great job with that style. I used International for my steel Curvex and wasn't thrilled with the result even after two attempts. That said, Kirk Rich is vastly overpriced and they take forever. But you'll likely get a good result, and I think this is a watch that's worth it.
As for poaching, you snooze, you lose, and I was dozing on this one.
|
|
|
|
|
|
| Re: stainless steel Curvex [message #6289 is a reply to message #6288] |
Tue, 24 November 2015 01:10 |
 |
kastner
Messages: 339
Registered: May 2013
Location: Pasadena CA
|
Gruen Guildsman |
|
|
GaryM wrote on Mon, 23 November 2015 22:03Seems though all his Gruen(s) were altered in one way or another so I passed.
That was my take as well. I don't regret not getting anything from the sale.
.
[Updated on: Tue, 24 November 2015 01:11] Report message to a moderator |
|
|
|
| Re: stainless steel Curvex [message #6292 is a reply to message #6289] |
Wed, 25 November 2015 22:30 |
 |
timeliz
Messages: 602
Registered: May 2013
Location: Northern California
|
Gruen Master |
|
|
Nice watch, Jack! And great looking triple-play of a stainless collection!
"Some days are diamonds, some days are stones..." -John Denver
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: stainless steel Curvex [message #8207 is a reply to message #6320] |
Mon, 03 July 2017 05:19 |
|
JackW
Messages: 1938
Registered: May 2013
Location: Denver
|
Gruen Authority
Head Janitor
Site Admin |
|
|
I finished this watch this weekend.
I took my time on this one... the dial was a major concern to me. I even tracked down a different dial based on some pictures from afire and Cary.
...but it didn't fit.
The spare cal 311, that came with the dial, I though would at least be good for spare parts. It was a good purchase. So, I finally sent the dial to Kirk Rich of California. After much discussion with them, it was decided that the numbers and minute track were original; they were fired-on enamel. What wasn't correct was the subseconds bit, the font for Gruen and the lack of the word "Precision". These were just contact prints. I've seen a few other early-ish 311 Curvex's that did not say "Curvex" on the dial. I can always add it later if needed, likely was over the seconds bit as it was. I'm a bit disappointed in the small section where the minutes track is disconnected from the edge of the seconds track. It is what it is... But after rather exhaustive research on this one, I think that this is what the original dial looked like; or darn close. I did not have "Switzerland" placed at the bottom.
Now that 311 was a PITA to work on. In disassembly of the watch for cleaning, I noted that the hair spring had several kinks and the over-coil was not well aligned. So, having had success with several other watches that needed minor tweeking I went after the hairspring. Holy cats! This is the softest hairspring metal I've encountered. It is even worse that other Gruen hairsprings. Did they change the type of alloys in the Conoruma metal at some point? I've done work on several 405/420 series and other earlier movements such at the cal 485. I ended up mangling this one further... So I turned to the spare I bought. Water damage had impacted the movement, but it was most apparent in the hairspring. It starting disintegration as I was removing it. Cary saved me with another donor 311. Thanks Cary!
I did also get something unexpected in the first donor movement.... an original winding crown. Tt has the dust 'flange' that is seen on lots of Quadrons and tank models. Apparently it came on some early Curvex models too. Is marked with "International Brevet Depose", but no numbers. I believe that dust-proof crown rights was held by Alpina. Unfortuantely, it doesn't fit to the case I have. The winding crown on mine is underfit, its hard to wind the watch fully.
This was one of the three movements to roll off the bench this week.
...and firmly attached to my wrist.
All I know is based on hard work & writing by others. I can only aspire to augment this body of knowledge. If I am wrong it is because of my own failings. -me
"If I have seen farther it is by standing on the shoulders of giants." - Newton
[Updated on: Mon, 03 July 2017 05:24] Report message to a moderator |
|
|
|
Vintage Gruen
Blog
Pages
Search
Help
Members
Register
Login
Home
